Alu anodi SE120/130/150/170

Alu anodi SE120/130/150/170
SP125/155/240/285/300/SH160

 

  • The mil-spec alloy includes about 5% Zinc and a trace of Indium to prevent oxidation resulting in a layer reducing the sacrificial properties of the anode.
  • Provides more protection and will last longer than zinc anodes of the same size (up to 50% longer).
  • Less than half the weight of of a similar sized zinc anode.
  • Provides superior support compared to zinc anodes in fresh or brackish water, while still giving excellent pro­tection in salt water, and is the only anode that is safe for all applications.
Kuvaus Aluminum Alloy Anode (Al-Zn-In)
Halkaisija 2" (50mm)
Paksuus 1.65" (42mm)
Kiinnitysruuvi Sisältää

20 1180 A Målskisse

# Description Product
1 Alu anode 10 9998
2 Bolt DIN 912 - M6 x 30

The installer alone has responsibility for the installation of the spare parts. Side-Power only warranty the spare parts supplied only.

The information given in the document was correct at the time it was published. However, Sleipner Motor AS can not accept liability for any inaccuracies or omissions it may contain. Continuous product improvement may change the product specifications without notice. Therefore, Sleipner Motor AS can not accept liability for any possible differences between product and document.

Tiedosto Tyyppi Kieli Lataa
Product information thruster anode chart.pdf Product sheet English  Lataa
CAD-filer og tekniske tegniner

3D-modeller og tekniske tegninger
for designere og båtbyggere

Hos Sleipner har vi delt vår kunnskap og teknologi med ingeniører og båtbyggere i over hundre år. Nå kan du også få tilgang til vårt CAD bibliotek med .cad, .igs, .dwg, .stp, .xt, .pdf filer og mer.

Få tilgang til 1000+ CAD-filer